Ever since the Z06 hit the street, Stingray owners have been asking us the same question: can I get that look on my car? The answer is yes. A C8 Stingray to Z06 conversion is one of the most popular builds we see at Auto Addict USA, and you can do it all at once or one stage at a time. This guide walks through every piece, from the Z06 Track Package bumper kits to ZR1-style hoods, carbon fiber spoilers and our own Euro-style LED taillights, so you can plan your build the right way.
Every part below fits the C8 Stingray, and most of it comes straight from the Auto Addict USA line. Let's break it down.
Why Stingray Owners Go for the Z06 Look
The Stingray is already a mid-engine supercar for the street. But the Z06 front end, with its bigger openings, lower lip and track-focused aero, has become one of the most recognizable looks in the entire C8 lineup. Converting gives your Stingray that presence without trading in the car you already love. And because the conversion comes in pieces, you can mix and match: some owners stop at a spoiler and taillights, others go full front-to-rear with a ZR1-style hood.
Start Up Front: Z06 Track Package Front Bumper Conversion
The front bumper is where the transformation starts. Our 2020–2024 Corvette C8 Stingray Z06 Track Package 15-piece front bumper conversion kit gives you the complete Z06 front end in one package:
- Bumper shell (flat black)
- Lower grille
- Both fog light inserts
- 3-piece Z06 lower lip
- Canards (dive planes)
- Plastic bar protection
The kit ships with primer pre-applied and is meant to be prepped and painted (or wrapped) by a professional body shop. One tip from our shop: test fit the bumper first and let it sit in the sun or under a heat lamp so it forms to the car before paint. It makes a real difference in how clean the final fit looks.
Match the Back: Z06 Track Package Rear Bumper Conversion
A Z06 nose with a Stingray tail can look unfinished, so most full builds pair the front kit with our C8 Stingray Z06 Track Package conversion rear bumper kit. It brings the aggressive Track Package rear design to your 2020–2024 Stingray and includes the bumper along with the hardware you need for the swap. Like the front, it comes in primer and should be painted by a pro after a test fit.
Keeping your factory rear bumper? Clean up the back with our carbon fiber license plate backing for the C8 Stingray rear bumper. It's a direct replacement for the factory plastic piece, made for the OEM Stingray rear bumper only (it won't fit a bumper conversion).
Add the Wing: Z07-Style and ZR1 ZTK Carbon Fiber Spoilers
Nothing finishes a Z06-look build like a proper wing. We offer two main carbon fiber options for the Stingray:
- Type-Z07 Style Carbon Fiber Rear Spoiler (2-piece): gloss carbon with a UV-protected clear coat, and it includes chassis mount brackets for extra support at speed. It fits Stingray coupe and convertible, and the base covers the factory Z51 spoiler holes.
- ZR1 ZTK Style Carbon Fiber Rear Spoiler (1-piece): inspired by the ZR1 ZTK track aero package for the most aggressive rear stance. If your car doesn't already have the factory Z07-style chassis mounts, you'll need chassis mount brackets to install it.
Go ZR1 Up Top: Type-ZR1 Hood Options
Want the front end to look even meaner? A ZR1-style hood is the next step, and we offer it two ways:
- Type-ZR1 Double-Sided Carbon Fiber 2-Piece Hood: gloss carbon on both sides and a direct bolt-on for the Stingray, Z06 and E-Ray. The 2-piece design lets you run it with or without the vent lip, and drain holes help keep water out of the front trunk.
- Type-ZR1 Fiberglass Black-Coated 2-Piece Hood: the same ZR1-inspired design in a paint-ready fiberglass build that mounts to the factory hood hinges and latch. A great option if you want the hood color-matched to your car.
Light It Up: Auto Addict Euro Smoke LED Taillights
Your Stingray's rear end deserves lighting that matches the new look. Our C8 Corvette Euro Smoke Style LED taillights are an original Auto Addict USA design (Patent Pending), with gloss black housings, smoke lenses, sequential amber turn signals, an LED DRL strip and bright white LED reverse lights. The wiring comes pre-assembled for plug-and-play installation, and they fit 1LT, 2LT, 3LT, Z06 and E-Ray models.
Starting Smaller? The C8 Stingray Aero Bundle
Not ready for a full conversion? Our Corvette C8 Aero Bundle for Stingray packs three upgrades into one: a gloss black Evo-style front chin splitter, gloss black Evo-style side skirts and a 1-piece Type-Z06 style carbon fiber rear spoiler. It gives your Stingray a track-ready stance from front to rear and mounts using factory points and hardware. The bundle's spoiler is made for the Stingray only, not the Z06. Just want the skirts? The Evo-style side skirts are also sold on their own.
How to Plan Your C8 Z06 Conversion Build
Here's how we usually see Stingray owners stage it:
- Stage 1, easy wins: Euro LED taillights plus the aero bundle or a carbon fiber spoiler. A big visual change with no paintwork needed.
- Stage 2, the statement piece: a Type-ZR1 hood in carbon fiber or paint-ready fiberglass.
- Stage 3, the full conversion: Z06 Track Package front and rear bumper kits, painted by your body shop, with a Z07 or ZTK wing to finish it off.
Browse every part for your car in our 2020–2027 Corvette C8 collection.
C8 Stingray to Z06 Conversion FAQs
Will the Z06 conversion bumpers fit my Stingray?
Our Z06 Track Package front and rear conversion kits are made for the 2020–2024 Corvette C8 Stingray. Check the fitment on each product page, or give us a call before you order.
Do the conversion bumpers come painted?
No. They ship with primer pre-applied and should be prepped and painted or wrapped by a professional body shop. Test fit first, and let the parts sit in the sun or under a heat lamp so they form to the car before paint. Light scratches in the primer are normal, since the parts are meant to be prepped.
Do I need brackets for a ZR1 ZTK spoiler on a Stingray?
If your Corvette doesn't have the factory Z07-style chassis mount setup, chassis mount brackets are required. If it already has the OEM Z07 brackets, the spoiler mounts directly. Our Type-Z07 style 2-piece spoiler comes with chassis mount brackets included.
Are the Euro taillights plug-and-play?
Yes. All the wiring comes pre-assembled for plug-and-play installation on C8 1LT, 2LT, 3LT, Z06 and E-Ray models.
Can I install these parts myself?
The taillights are plug-and-play, but we recommend professional installation for the bumper kits, hoods and spoilers to get the best fit and finish.
Build Your Z06-Look Stingray with Auto Addict USA
Whether you start with taillights or go all the way to a full front-and-rear conversion, our team knows the C8 platform inside and out. Questions about fitment or the right parts for your build? Email sales@autoaddictusa.com or call (714) 944-7923 and we'll help you plan it.
